Q110

• Device

Device Type

Indoor Covert Camera

Image Sensor

Progressive Scan CMOS

Sensor Size

1/3.2"

Effective Pixels

2592 (H) x 1944 (V) (5.04 MP)

Day / Night

No

Low Light Sensitivity

No

Minimum Illumination

Color: 0.1 lux at F2.8 (30 IRE, 2400°K)

Mechanical IR Cut Filter

No

IR Sensitivity Range

No

Electronic Shutter

1/5 ~ 1/32,000 sec (manual mode); 1/5 ~ 1/32,000 sec (auto mode)

Horizontal Resolution

1350 TVL

S/N Ratio

52 dB

• Lens

Focal Length / Aperture

Fixed focal, f1.9mm / F2.8

Iris

Fixed iris

Focus

Fixed focus

Cable Type

RJ12 connector up to 12m from main unit

Horizontal Viewing Angle

126.9° (overview area), 77.4° (high detail area)

• Video

Compression

H.264 (Baseline / Main / High profile), MJPEG

Max. Frame Rate vs. Resolution

15 fps at 2592 x 1944; 15 fps at 2048 x 1536; 30 fps at 1920 x 1080;

Multi-Streaming

Simultaneous dual streams based on two configurations

Bit Rate

28 Kbps - 6 Mbps (per stream)

Bit Rate Mode

Constant, Variable

Image Enhancement

Basic WDR (74 dB); White balance: automatic, hold, and manual; Brightness; Contrast;

Privacy Mask

4 configurable regions

Text Overlay

User defined text on video

Image Orientation

Image flip and mirror

• Audio

Compression

8 kHz, Mono, PCM, 16 bit encoding; G.711

Audio-In

Mic-in and line-in, Terminal block

Audio-Out

Line-out, Terminal block

• Network

Protocol & Service

TCP, UDP, HTTP, HTTPs, DHCP, PPPoE, RTP, RTSP, IPv4, IPv6, DNS, DDNS, NTP, ICMP,ARP, IGMP, SMTP, FTP, UPnP, SNMP, Bonjour

Ethernet Port

1, Ethernet (10/100 Base-T), RJ-45 connector

Security

IP address filtering; HTTPs encryption; Password protected user levels; Anonymous login; IEEE802.1X network access control

• Alarm

Alarm Trigger

Video motion detection (3 regions); External device through digital input; Sound detection

Alarm Response

Notify control center; Change camera settings; Command other devices; E-mail notification with snapshots;

• Interface

Digital Input

1, Terminal block

Digital Output

1, Terminal block

Serial Port

1, RS-232

Local Storage

MicroSDHC/MicroSDXC memory card slot (card not included)

• General

Power Source / Consumption

PoE Class 2 (IEEE802.3af) / 4.32 W

DC 12V (adapter not included) / 3.6 W

Weight

0.594 kg (1.31 lb)

Dimensions (L x W x H)

100.33mm x 75mm x 25.5mm (3.95" x 2.95" x 1")

Environmental Casing

Vibration proof (EN50155)

Mount Type

Flush, Surface, Tilted Mount, Corner, Height Strip

Bundled Accessories

Flush mount, Surface mount, Tilted mount

Starting Temperature

-20°C ~ 50°C (-4°F ~ 122°F)

Operating Temperature

-30°C ~ 60°C (-22°F ~ 140°F)

Operating Humidity

10% ~ 85% RH

Approvals

CE (EN 55022 Class B, EN 55024), FCC (Part15 Subpart B Class B), EN50155, UL (for optional PoE injector and power adapter)

• Integration

Unified Solution

Fully compatible with ACTi software

ISV Integration

Software Development Kit (SDK) available; ONVIF compliant

GPS Position

Manual setting

Firmware Access Browser

Microsoft Internet Explorer 8.0 or newer (full functionality)