Planet 24-Port 10/100/1000Mbps + 4 Shared Gigabit TP/SFP Combo IPv6 Managed Switch PoE+ 802.3at: 220w PoE Max, 2yr
Features:
Physical Port
- 24-Port 10/100/1000Base-T RJ-45 copper with IEEE 802.3at/802.3af Power over Ethernet Injector function
- 4 100/1000Base-SX/LX DDM SFP shared interfaces
- RS-232 DB9 console interface
Power over Ethernet
- Complies with IEEE 802.3at High Power over Ethernet End-Span PSE
- Complies with IEEE 802.3af Power over Ethernet End-Span PSE
- Up to 24 ports of IEEE 802.3at/802.3af devices powered
- Supports PoE power up to 30.8 watts for each PoE port
- Auto detects powered device (PD)
- Circuit protection prevents power interference between ports
- Remote power feeding up to 100m
- PoE Management - Total PoE power budget control- Per port PoE function enable/disable- PoE port power feeding priority- Per PoE port power limit- PD classification detection- PD alive-check- PoE schedule- PD power recycling schedule
Layer2 Features
- Prevents packet loss with back pressure (half-duplex) and IEEE 802.3x pause frame flow control (full-duplex)
- High performance of Store-and-Forward architecture and runt/CRC filtering eliminates erroneous packets to optimize the network bandwidth
- Storm Control support - Broadcast/Multicast/Unknown unicast
- Supports VLAN - IEEE 802.1Q Tagged VLAN
We usually stock at least a couple units. Larger orders can take 10-14 days to ship. Stock changes daily
SPECIFICATION
|
Hardware Specifications |
|
|
Copper Ports |
24 10/100/1000Base-T RJ-45 Auto-MDI/MDI-X ports |
|
10/100/1000Mbps / SFP Combo Interfaces |
4 10/100/1000Mbps TP and SFP shared combo interfaces, SFP(Mini-GBIC) supports 100/1000Mbps dual mode DDM, shared with Port-21 to Port-24 |
|
Console |
1 x RS-232 DB9 serial port (115200, 8, N, 1) |
|
Switch Architecture |
Store-and-Forward |
|
Switch Fabric |
48Gbps/non-blocking |
|
Throughput |
35.7Mpps@64Bytes |
|
Address Table |
8K entries, automatic source address learning and ageing |
|
Share Data Buffer |
4 megabits |
|
Flow Control |
IEEE 802.3x pause frame for full-duplex |
|
Jumbo Frame |
9K bytes |
|
Reset Button |
< 5 sec: system reboot |
|
LED |
System: |
|
Power Requirements |
WGSW-24040HP: 100~240V AC, 50/60Hz, 4A |
|
Power Consumption (Full Load) |
WGSW-24040HP: 262 watts |
|
ESD Protection |
6KV DC |
|
Power over Ethernet |
|
|
PoE Standard |
IEEE 802.3at/802.3af Power over Ethernet/PSE |
|
PoE Power Supply Type |
End-Span |
|
PoE Power Output |
Per Port 56V DC, 590mA |
|
Power Pin Assignment |
1/2(+), 3/6(-) |
|
PoE Power Budget |
WGSW-24040HP: 220 watts max. |
|
PoE Ability |
■ PD @ 7 watts |
|
Layer2 Management Function |
|
|
Basic Management Interfaces |
Console, Telnet, Web Browser, SNMP v1, v2c |
|
Secure Management Interfaces |
SSH, SSL, SNMP v3 |
|
Port Configuration |
Port disable/enable |
|
Port Status |
Display each port’s speed duplex mode, link status, Flow control status, Auto negotiation status, trunk status |
|
Port Mirroring |
TX/RX/Both |
|
VLAN |
802.1Q Tagged based VLAN, up to 255 VLAN groups |
|
Link Aggregation |
IEEE 802.3ad LACP/Static Trunk |
|
QoS |
Traffic classification based, Strict priority and WRR |
|
IGMP Snooping |
IGMP (v1/v2/v3) Snooping, up to 255 multicast Groups |
|
MLD Snooping |
MLD (v1/v2) Snooping, up to 255 multicast Groups |
|
Access Control List |
IP-based ACL / MAC-based ACL |
|
Bandwidth Control |
Per port bandwidth control |
|
SNMP MIBs |
RFC-1213 MIB-II |
|
Standards Conformance |
|
|
Regulation Compliance |
FCC Part 15 Class A, CE |
|
Standards Compliance |
IEEE 802.3 10Base-T |
Downloads:
