This product has been discontinued.
- Buy 2 for $3,400.00 each and save 2%
- Buy 4 for $3,300.00 each and save 5%
- Buy 6 for $3,200.00 each and save 8%
- Buy 8 for $3,100.00 each and save 11%
- Buy 10 for $3,000.00 each and save 14%
Similar Products
Downloads:
SPECIFICATION
Power supply |
AC100 V~240V |
Working temperature |
-68°F ~+122°F |
Working frequency |
4KHz~8KHz |
Standard external size |
27.28 ft (H)X 2.7 ft (W)X 1.9 ft (D) |
Standard internal size |
6.52 ft (H)X 2.3 ft (W)X 1.9 ft (D) |
Package Dimensions |
7.58 ft (H)X 1.15 ft (W)X 2.18 ft (D) |
Gross weight |
143 lbs |
Temperature sensor type |
IR temperature sensor |
Temperature measurement time |
≤1s |
Temperature measurement point |
Forehead or wrist |
Best temperature measurement distance |
6 inches |
Height of temperature sensor |
5 feet (customizable) |
Tolerance of temperature measurement |
± 0.9 °F |
Measuring range |
86°F - 113°F |
Interval between two temperature measurement |
2s |
Can silence audible alarm, but can't turn off LED alarm.
Temperature module is not required to walk through the metal detector.
The sensor can be positioned in different areas, but once it's fixed, it cannot be moved.
- Can be as low as 18 inches.
- Can add additional sensor (children)
You can program the sensitivity and zones with the wireless remote control.
- Prison setting: the most sensitive, will detect stud nose ring and any ferrous (solid) metals.
- Concert: will allow belt buckle or cell phone and non-ferrous metals, e.g. for jewelry applications.
- Can also reset and recalibrate and reset alarm/person count from the remote control.
- Controls can also be done on the unit.
No connectivity or reporting as of August 2020.
- No HIPPA issues.
- Will be integrated into software soon.
30 minutes assembly with step-ladder
- 2 bolts on each side, 8 total.
- Can be bolted to the ground.
- No wheel option currently.
Have people acclimate for a couple minutes before being temp-checked. Can temp-check immediately if the outside temperature is around 65 degrees F.
If the machine is moved, then allow 10 minutes for warm-up.
If the machine is not moved, then there is no need to allow any time for warm-up.
Free remote training available directly from ZKTeco USA.