Case Study–Cannabis Grow House In 2017, a Los Angeles County-based grow house, which will go unnamed for security and privacy reasons, contacted us to design and install a security camera system. One of the partners had a copy of his local security requirements for operating the facility, and so we scheduled a free site inspection to survey the property. During the site inspection, we notated the general layout of the facility, noted potential security risks, and recommended cameras and placement that would accommodate the project’s budget while meeting or exceeding the minimum security requirements from the state of CA and City of Los Angeles. On the day of the site inspection, their security consisted of a non-security guard camped out in a trailer on a gated driveway, three dogs, consumer-grade doors and locks, and an intrusion alarm system. The various areas requiring coverage included the entrance, exits, hallways, a large laboratory-style room with expensive lab equipment, several temperature and light-controlled grow rooms, a network/security room with MDF closet where the recorder was to be installed, multiple hallways leading to each of these rooms, and rooftop coverage because of the easy access from a neighboring building. They required at least 90 days […]
Read Now
By Raymond Shadman Direct/SMS/Fax: 310-370-9500 x1 Phone: 877.DEALS.79 or 310.370.9500 x101 Email: [email protected] Web: customvideosecurity.com Skype: rshadman Here are my questions to ISONAS regarding replacing a hospital’s S2 control panels with ISONAS IPBridge units so that they can use their existing S2 readers at each of their existing access controlled doors and have integration into Milestone XProtect. The hospital’s intent is to add new ISONAS equipment to the new doors, while to use existing equipment where possible, given their fairly recent investment into S2, which was substantial. S2, unfortunately, does not offer any integration into Milestone XProtect. Q1) Is it the Pure Access Software that integrates with Milestone XProtect? A1) The Milestone Pure Access integration is expected to be complete in June. This is related to their newer RC04 Pure Access products, because their RC03 integration was complete at least 1-2 years ago. Q2) The Milestone XProtect server will be running Windows 7 Pro 64-bit. Must we have Server2012 R2 or better for Pure Access, or is it better for Pure Access to run on its own server or workstation? A2) The Manager on-premise version of Pure […]
Read Now