Arecont Vision 2.1MP 1080p MegaDome 2 Day/Night Dome IP Camera: 3-9mm Motorized Lens Audio PoE Heater 3yr
This product has been discontinued.
This product has permanently been discontinued. Please find alternative products from below, or contact us if you cannot use any substitutes to see if any stock is remaining nationwide.
The AV2255AM-AH MegaDome® 2 series network camera is part of Arecont Vision’s full line of H.264 MegaDome® series cameras. This fully compliant implementation of H.264 (MPEG 4, Part 10) provides full 1920 x 1080 megapixel resolution at full video frame rates of 32fps. The AV2255AM-AH camera line provides an all-in-one solution with integrated 1080p resolution camera, remote focus, remote zoom, auto iris lens, and IP66 and vandal resistant dome enclosure. With the features of Casino mode, PSIA compliance, privacy masking, extended motion detection and flexible cropping, the AV2255AM-AH is a high sensitivity, PoE (IEEE 802.3af) compliant camera with audio and heater. Built with Arecont Vision’s massively-parallel MegaVideo® technology, this camera offers over six times the resolution of standard resolution IP cameras with the ability to output full real-time frame rates and deliver the high quality megapixel imaging for both indoor and outdoor applications.
Pixel Density 2.07 MP
Full Field of View (FOV) Resolutions
1920(H) x 1080(V) 2.07 megapixel
Horizontal Sensor Size 5.36 mm
Frame Rate 32 fps
Vertical Sensor Size 4.267 mm
Mechanical
Casing:
Die-cast aluminum chassis with 4" polycarbonate dome bubble
IP66 weather proof standard
Vandal Resistant, IK10 rated
Easily adjustable 3-axis camera gimbal w/ 360°pan, 90°tilt & 360°z-axis
Total unit dimensions:
Ø5.5 x 4.9 in (H), bubble only: Ø4.0 x 2.4 in (H)
Ø140.3 x 124.6mm (H), bubble only: Ø102 x 61.8mm (H)
2.25 lbs (1.02kg)
Cropped Resolution
960(H) x 540(V) 1/4 resolution
Data Transmission
32fps @ 1920x1080
42fps @ 1280x1024
TFTP, HTTP, RTSP, RTP/TCP, RTP/UDP
100Base-T Ethernet network interface
Multi-streaming: 8 non-identical streams
Electrical
General purpose opto-isolated input and output
Power over Ethernet (PoE) 802.3af for camera, IR LEDs and heater
Auxiliary power 12-48V DC, 24V AC for camera, IR LEDs and heater
Power consumption:
10.7 watts Base model / -AH model
12.6 wattsh IR model / -IR, -AH models
Audio Electical (-A, -AH models only):
Streaming: Two-way
Compression: G.711 PCM 8 kHz
Input/output: External microphone input or line input / line output
Heater Electrical (-H, -AH models only):
Power Consumption: 2.28 W Max
Switch: On: 4C° (32.9 °F), Off: 6.5 °C (43.7 °F)
Total PoE Solution: No external power requirement
IR Illuminator (IR models only):
24 pcs 850nm LEDs / 15 meter IR distance (max) / 40° IR angle
No external power required
Total PoE Solution: No external power requirement
Regulatory
FCC, CE Mark, UL Listed
Standard
PSIA and ONVIF compliant
Programmability
Remote focus, remote zoom
Casino Mode™, flexible cropping and low light noise filter control
Sutter speed: 1ms - 500ms
Backlight compensation
Auto multi-matrix white balance
On-camera motion detection and privacy mask w/ 1024 detection zones
