Easily adjustable 2-axis camera gimbal with 360° pan and 90° tilt
Hard ceiling mount and surface mount embedded
Die-cast aluminum chassis with 5.5” vandal resistant polycarbonate dome bubble
Conduit 3/4” NPT standard
Total Unit dimensions:
Ø6.9 x 6.55 in (H), bubble only: Ø5.5 x 3.4 in (H)
Ø175 x 166 mm (H), bubble only: Ø140 x 87 mm (H)
3.81 lbs (1.75 kg)
Cropped Resolution
3200(H)x600(V)
Data Transmission
Video frame rate up to: - 6 fps @ 6400x1200
Compression type - H.264 (MPEG4, Part 10) - Motion JPEG
21 levels of quality
TFTP, HTTP, RTSP, RTP over TCP, RTP over UDP image transmission protocols
100Base-T Ethernet Network Interface
Bit rate control from 100Kbps to 10Mbps
Multi-streaming: 8 non-identical streams
Electrical
General purpose opto-coupled input and output
Power over Ethernet (PoE): PoE 802.3af for camera
Auxiliary power 12-48V DC, 24V AC
Power consumption:9 watts maximum
Heater & Blower Electrical - Voltage Input: 12V to 20V DC/24VAC (separate power required) - Power Output: 11W Max (DC12V); 13W Max (AC24V) - Heater Switch: On: 17C° (62.6 °F), Off: 30 °C (86 °F) - Blower Switch: On: 10C° (50°F), Off: 15 °C (59 °F) - Blower Switch: On: 50C° (122 °F), Off: 45 °C (113°F)
Regulatory
FCC, CE, RoHS, UL
Standard N/A
Programmability
+/- 5 ° Electrical Vertical Alignment to adjust sensor position
Privacy mask
Auto Exposure (AE) and Gain Control (AGC) >120dB
On-camera real-time motion detection with 1024 detection zones
Auto backlight compensation
Auto multi-matrix white balance
50/60Hz selectable flicker control
Electronic pan, tilt, zoom (PTZ)
Electronic image flip - 180 degree rotation
Resolution windowing down to 1x1 pixel for JPEG and 2x2 pixels for H.264
Programmable shutter speed to help control motion blur
MoonLight™ mode - extended exposure and proprietary noise cancellation
