This product has been discontinued.
This product has permanently been discontinued. Please find alternative products from below, or contact us if you cannot use any substitutes to see if any stock is remaining nationwide.
Similar Products
SPECIFICATION
Camera | |
---|---|
Image Sensor: | 1/4" progressive scan CMOS |
Min. Illumination: | 0.01Lux @(F1.2,AGC ON) , 0.028Lux @(F2.0,AGC ON) ,0 Lux with IR |
Shutter time: | 1/3 s ~ 1/100,000 s |
Lens: | 4mm@ F2.0, Angle of view: 52.4° (2.8mm, 6mm optioanl) |
Lens Mount: | M12 |
Adjustment Range: | Pan: 0° - 355°, Tilt: -20° - 90° |
Day& Night: | IR cut filter with auto switch |
Wide Dynamic Range: | Digital WDR |
Compression Standard | |
Video Compression: | H.264/MJPEG |
H.264 code profile: | Baseline Profile / Main Profile |
Video bit rate: | 32Kbps~8Mbps |
Audio Compression: | G.711/G.722.1/G.726/MP2L2 |
Audio bit rate: | 64Kbps(G.711) / 16Kbps(G.722.1) / 16Kbps(G.726) / 32-128Kbps(MP2L2) |
Image | |
Max. Image Resolution: | 1280 × 720 |
Frame Rate: | 50Hz: 25fps(1280 × 720, 704 × 576, 640 × 480) 60Hz: 30fps (1280 × 720, 704 × 576, 640 × 480) |
Image Enhancement: | BLC/3D DNR/ROI |
Image Settings: | Rotate Mode, Saturation, Brightness, Contrast, Sharpness adjustable by client software or web browser |
Day/Night Switch: | Auto/Schedule/Triggered by Alarm In |
Network | |
Network Storage: | Micro SD/SDHC/SDXC card with ANR (up to 128G), NAS (Support NFS, SMB/CIFS) |
Alarm Trigger: | Line Crossing, Intrusion Detection, Motion detection, Dynamic analysis, Tampering alarm, Network disconnect , IP address conflict, Storage exception |
Protocols: | Intrusion Detection, Line Crossing detection, Motion detection, Dynamic Analysis, Tampering alarm, Network disconnect, IP address conflict, Storage exception |
General Function: | User Authentication, Watermark, IP address filtering, Anonymous access |
System Compatibility: | ONVIF (Profile S, Profile G), PSIA, CGI, ISAPI |
Wi-Fi Specification (-W) | |
Wireless Standards: | IEEE802.11b, 802.11g, 802.11n |
Frequency Range: | 2.4 GHz ~ 2.4835 GHz |
Channel Bandwidth: | 20/40MHz Support |
Modulation Mode: | 802.11b: CCK, QPSK, BPSK 802.11g/n: OFDM |
Security: | 64/128-bit WEP, WPA/WPA2, WPA-PSK/WPA2-PSK, WPS |
Transmit Power: | 11b: 17±1.5dBm @ 11Mbps 11g: 14±1.5dBm @ 54Mbps 11n: 12.5±1.5dBm |
Receive Sensitivity: | 11b: -90dBm @ 11Mbps (Typical) 11g: -75dBm @ 54Mpbs (Typical) 11n: -74dBm (Typical) |
Transmission Rate: | 11b: 11Mbps 11g: 54Mbps 11n: up to 150Mbps |
Wireless Range: | 50m(depend on environment) |
General | |
Operating Conditions: | -30 °C ~ 60 °C (-22 °F ~ 140 °F) Humidity 95% or less (non-condensing) |
Power Supply: | 5 V DC ± 10% |
Power Consumption: | Max. 7 W |
IR Range: | 10 meters |
PIR: | Angle: 80°, Range: 10m |
Dimensions: | 100.8×124 mm (3.97” × 4.88” ) |
Weight: | 300 g (0.66 lbs) |
NOTEļ¼: | "-W" series support Wi-Fi (802.11b/g/n) and the modules with Wi-Fi function don’t support the 802.1X protocol. |
Downloads:
Shipment
Ships within 1 business day.
SKU
DS-2CD2Q10FD-IW
Model
DS-2CD2Q10FD-IW
Camera Interface
IP
Installation Environment
Indoor Only
Adjustable Lens
Fixed
Iris
No
Brand
HikVision
Infrared Illumination Max Distance
35 ft / 10m
Input Voltage
Other
Vandal-Proof
No
Weather-Proof
No
Optical Zoom
No
OSD
No
WDR (Wide Dynamic Range)
D-WDR
Shipment
No
Product Condition
New
NDAA/TAA
No
Write Your Own Review