Out of stock
SKU
0628P-404E

Surge-Protected 4 Channel Passive Video Balun Transceiver

This device is capable of transmitting 4 video signals over a single UTP cable, whether terminated into an RJ45 or not terminated. It can serve either as the transmitter or receiver, one on the camera side, and one on the DVR side. It transmits 4 channels of video using a CAT5 cable. In order to convert the CAT5 cables signal BACK into 4 BNC channels, a second unit is necessary to serve as the receiver.
$19.95
  • Buy 2 for $18.95 each and save 5%
  • Buy 4 for $17.95 each and save 10%
  • Buy 8 for $16.95 each and save 15%
  • Buy 16 for $15.95 each and save 20%

Surge-Protected 4 Channel Passive Balun Transmitter/Receiver: 4x BNC-F to 1x RJ-45 + 8-pin Terminal Block

This device is capable of transmitting 4 video signals over a single UTP cable, whether terminated into an RJ45 or not terminated.

 

Model NO.

0628P-404E

Specs

4ch Passive Video Balun Transmitter/Receiver

Video

Frequency response: DC-6Mhz Common-mode/Differential-mode
Rejection: 15khz  C6Mhz 60dB type

Audio/data

no

Power

N/A

Impedance

Coax, male BNC:75 Ohm¸ UTP (Screwless) Terminal Block or
 UTP RJ45 Data Connector 100 Ohm

Wire type

One Unshielded Twisted Pair 24-16AWG (0.5-1.31mm) Per video signal: DC Loop Resistance 52 ohms per 1,000ft (18 ohms per 100m)

Surge suppression

6000V

Control/Adjust

N/A

UTP Port

RJ45 or Terminal Block 

Dimensions (mm)

102mm x 80mm 26mm

Weigth (g)

198g

Environment

Temperature:-10~+50 degrees C,  Humidity:0~95%

Click HERE to download PDF manual.

More Information
Price
$19.95
SKU
0628P-404E
Model
0628P-404E
Number of Audio Channels
0
IP Camera Support
No
Brand
eDigital
Product Condition
New
Write Your Own Review
You're reviewing:Surge-Protected 4 Channel Passive Video Balun Transceiver
Your Rating
To Top