16 Channel 12-volt DC Passive Balun Receiver Hub: 16 x RJ-45 Inputs for HD Video and 12v Power, 16 x BNC Female Outputs to DVR, 2yr
Send 12-volt DC Power and Video over Cat5 to Up to 16 CCTV Cameras using this passive video balun receiver hub. At 16.5A with 1.5A maximum amps per channel, this power supply hub is ideal to power traditional CCTV cameras without or with normal-distance Infrared LEDs. This unit gets installed on the DVR side, and it requires matching transmitters at the cameras' side, Custom Video Security part number EA-PVB.
Tested at up to 5MP in HD-TVI at up to 300 ft, this unit can send 12-volt DC Power and Video over Cat5 to up to 16 analog CCTV cameras. At 16.5A with 1.5A maximum amps per channel, this power supply hub is ideal to power traditional CCTV cameras without or with normal-distance Infrared LEDs.
This unit gets installed on the DVR side, and it requires matching transmitters at the cameras' side, part number EA-PVB.
Specification:
16-CH DC 12V Power Supply HD Video Receiver Hub
* Power camera; 300W, Max 1A per channel
* Compatible with HDTVI / AHD / HDCVI / 960H
* Transmission Distance: 720P up to 1,312ft (440m) / 1080P up to 623ft (190m) / 5MP up to 300 ft (91m)
* Real-time transmission, Exceptional interference rejection;
* Built-in TVS for surge protection & ground loop isolation
* Lightning protection design Grade III, Wave Filter Design, Anti-Static Design
* Black galvanized housing
|
Transceiver Type |
16CH Passive Video Balun Receiver & Power Supply Hub (VPS) |
|
Video |
Frequency Response Range: DC-5MHz; Common-Mode / Differential-Mode rejection: 15KHz-5MHz 60dB type |
|
Wire Type |
24-16AWG UTP CAT5 or higher; DC loop resistance ≦18Ω/ 100m; Differential capacitance: 62pF/m (max) |
|
Impedance |
UTP or Connection or RJ-45: 100Ω; BNC Coax:75Ω |
|
Power Output |
16.5A total output, 1.5A maximum output per channel |
|
Power Transmission |
12V DC up to 750 ft Via UTP Cat5e / 6 |
|
Dimensions |
19.4" x 6.7" x 1.8" |
|
Weight (lb) |
7.1 lbs |
