This product has permanently been discontinued. Please find alternative products from below, or contact us if you cannot use any substitutes to see if any stock is remaining nationwide.
The AV3256PM MegaDome® 2 series network camera is part of Arecont Vision’s Wide Dynamic Range line of H.264 MegaDome® 2 series cameras. This fully compliant implementation of H.264 (MPEG 4, Part 10) provides full 2048 x 1536 megapixel resolution at full video frame rates of 21fps. The AV3255AM camera line provides an all-in-one solution with integrated 3 megapixel camera, remote focus, remote zoom, auto iris lens, and IP66 and vandal resistant dome enclosure. With the features of binned mode, PSIA compliance, privacy masking, extended motion detection and flexible cropping, the AV3256PM is a high sensitivity, PoE (IEEE 802.3af) compliant camera. Built with Arecont Vision’s massively-parallel MegaVideo® technology, this camera offers over four times the resolution of standard resolution IP cameras with the ability to output full real-time frame rates and deliver the high quality megapixel imaging for both indoor and outdoor applications.
Pixel Density 3.00 MP
Full Field of View (FOV) Resolutions
1920(H) x 1080(V) 2.07 megapixel
Frame Rate 30.0 fps
Mechanical
Audio:
Streaming: Two-way
Compression: G.711PCM 8kHz
Input/Output: External microphone input or line iput/line output
Casing:
Die-cast aluminum chassis with 4" polycarbonate dome bubble
IP66 weather proof standard
Vandal Resistant, IK10 rated
Easily adjustable 3-axis camera gimbal w/ 360°pan, 90°tilt & 360°z-axis
Total unit dimensions:
Ø5.5 x 4.9 in (H), bubble only: Ø4.0 x 2.4 in (H)
Ø140.3 x 124.6mm (H), bubble only: Ø102 x 61.8mm (H) 2.25 lbs (1.02kg)
Cropped Resolution
Flexible Cropping:
1280x1024 1.3MP
1280x720 HDTV - 720p
640x480 VGA
Data Transmission
32fps @ 1920x1080
42fps @ 1280x1024
TFTP, HTTP, RTSP, RTP/TCP, RTP/UDP
100Base-T Ethernet network interface
Multi-streaming: 8 non-identical streams
Electrical
General purpose opto-isolated input and output
Power over Ethernet (PoE): PoE 802.3af Class 3 for camera, IR LEDs and Fan
Auxiliary power 12–48V DC, 24V AC
Power consumption:
10.1 Watts DC power (base model/-A model)
12.1 Watts DC power (-IR model/-IR-A model)
Regulatory
FCC, CE Mark, UL Listed, REACH, RoHS, WEEE, IK-10, IP66
Standard
PSIA and ONVIF compliant
Programmability
Auto adjustment between LDR and WDR modes
Remote focus, remote zoom and P-iris control
Flexible cropping
Low-light noise filter control
Bit rate and bandwith limit control
Shutter speed: 1ms–500ms
Backlight compensation
Auto multi-matrix white balance
On-camera motion detection and privacy mask with up to 1024 detection zones
50/60Hz selectable flicker control
Electronic pan, tilt, zoom (PTZ) and image flip—180° rotation
MoonLight™ Mode: extended exposure and noise cancellation
