ETS SM1-T Conference Table Microphone: 12-24v DC
Made in USA.
Compatible Louroe part number : MODEL L‐DT
The SM1-T is a high performance,
omni-directional microphone designed to
sit on a table top. Built in limiter circuit
automatically lowers the output level
during loud sound intervals. Selectable
Hi cut and low cut filters significantly
reduce background noise. Built in
weights and 4 rubber feet help minimize
unwanted movement of the microphone.
Black ABS enclosure sits on any surface.
Connects directly to our switcher / mixer /
amplifiers or use one of our many
interface products to make fast and clean
connections to DVRs or remote
- SM1-T microphone.
- Warning label.
- Installation instructions.
- Omni-directional 25' pickup pattern
- Low noise MOSFET pre-amplifier.
- 500Hz-13Khz Frequency response.
- Jumper selectable hi-cut/lo-cut filters limit
- frequency response to up to 900 to 6Khz
- significantly reducing background noise.
- Jumper selectable volume range: "Line
- level" (0db) or "Microphone level" (-30db)
- Adjustable gain in both volume ranges.
- Internal peak limiter circuit
- (.5 sec response)
- 100 Ohm unbalanced output.
- 3 position Euro-style connector makes
- cable termination fast and clean.
- Power: 12 to 24VDC @ 10mA.
- On-board voltage regulator and
- RFI filtering.
- Industrial temperature range: -40 to 105C
- S/N ratio: more than 60DB
- Sensitivity –45DB
- Black ABS enclosure with rubber pads
- stays put on any surface.
- Dimensions: L 3.7” W 2.6” H 1.4”
- Weight 0.21lbs