Out of stock
SKU
UP-M3400
Shipment
Ships within 1 business day.
Test Monitor Tool for AHD and Analog Cameras
FEATURES
- Select your desired language: English, Chinese, Italian or Polish etc.
- 3.5” TFT-LCD screen display, 480(RGB) x 320 resolution
- LED Lamp, easy to operate at night
- User-defined shortcut keys (F1 and F2)
- LCD screen brightness/contrast/color saturation adjustable
- Automatically adapts and displays the video format of NTSC/PAL
- Enhanced color bar generator, new added gray-scale image test. PAL/NTSC multi-system color bar video generator (Eight-system switchable, transmit/receive eight-system colorful images)
- PING testing, PING is the most conventional network debugging tools; it is used for testing if the connected IP camera or other network equipment's Ethernet port is working normally and the IP address is correct.
- IP address scan, in digital IP surveillance applications, if the IP camera's IP address is not known; the device cannot be used. An IP address scan can quickly search for the connected IP camera or other network device's IP address.
- POE voltage test, test the PoE voltage when a POE switch is supplying POE power to an IP camera.
- Port finder, the tester will send signals to make the connected PoE port flicker at a set frequency. This will enable the installer to easily and quickly find the connected port for an Ethernet cable.
- Link monitor, check the setting IP address whether occupied.
- TDR cable test, test cable's open circuit (breakpoint) and short circuit location.
- PTZ address scan, search up the ID of PTZ camera
- Network cable and Telephone cable testing, display the sequence of connection and the NO of the Lan cable
- Support RS232/RS485/RS422, Rate 600 ~ 115200bps adjustable
- Supports more than thirty PTZ protocols, such as PELCO-P, PELCO-D, SAMSUNG, etc
- PTZ protocol analysis, control protocol command displays to check RS485 transmission whether is normal, easy to find the fault device
- PTZ control, Pan/tilts the P/T unit, zooms in/out the lens, adjusts the focus, aperture and sets and the preset position
- DC 12V 1A power output for camera
- Audio input test, test the audio signal from pickup devices
- Lithium Ion Polymer Battery. Remaining battery charge indicator, Lithium Ion Polymer battery can last 11 hours for normal use after charging for 4-5 hours.
Shipment
Ships within 1 business day.
$249.95
SPECIFICATIONS
| Video Test | |
| Signal Mode | NTSC / PAL (Auto adapt) |
| Display | 3.5 inch HVGA TFT-LCD, 480 (RGB) x 320 resolution |
| LCD Adjustment | Brightness, Contrast, Saturation adjustable |
| Video IN/OUT | 1 channel BNC Input & 1 channel BNC Output |
| Video Output Mode | 1.0 Vp-p |
| Video Signal Test | |
| Video Signal Test | Video signals measured in IRE or mV |
| PTZ Controller | |
| Communication | Support RS232 and RS485 |
| PTZ Protocol | Compatible with more than 30 protocols such as PELCO-D/P, Samsung, Panasonic, Lilin, Yaan, etc. |
| Baud Rate | 600, 1200, 2400, 4800, 9600, 19200, 57600, 115200bps |
| Video Signal Generation | |
| Color Bar Generator | Support both PAL / NTSC format's standard color bar output (Red, Green, Blue, White, Black, Grey) and testing image output |
| UTP Cable Tester | |
| UTP Cable Test | Display UTP cable connection status, cable type and the sequence of wires as well as read the number of the test box |
| DC12V 1A Power Output | |
| DC12V power output | Output DC12V1A power of camera |
| Audio Input Test | |
| Audio Input Test | 1 channel audio signal input, support audio recording |
| RS485 Data Analysis | |
| Data Monitor | Captures and analyzes the command data from controlling device |
| Ethernet Port Finder | |
| Port Finder | The tester will send signals to make the connected PoE port flicker at a set frequency. This will enable the installer to easily and quickly find the connected port for an Ethernet cable. |
| IP Scan, Link Monitor, PING Test | |
| IP Scan | Find out the connected IP camera or the other network equipment IP address quickly |
| Link Monitor | Check the IP address whether is occupied |
| PING testing | Test if the connected IP camera or other network equipment is working normally and the IP address is correct. |
| PoE Tester | |
| PoE Voltage Test | Measure PoE switch voltage and displays pin configuration |
| Power | |
| Power Adapter | DC 5V (1.5A) |
| Battery | Built-in 3.7V Lithium polymer batter, 3000mAh |
| Rechargeable | After charging 3-4 hour, working time lasts 11 hours |
| Low Consumption | Energy saving, battery capacity indicator |
| Parameter | |
| Operation Setting | OSD menu, select your desired language: English, Chinese, etc |
| Auto off | 5-60 (mins) |
| Keytone | On/Off |
| General | |
| Working Temperature | -10°C ~ +50°C |
| Working Humidity | 30% ~ 90% |
| Dimension | 194mm x 112mm x 48mm |
Shipment
Ships within 1 business day.
More Information
Price
$249.95
SKU
UP-M3400
Model
LD-M3400
Brand
OEM
Shipment
No
Product Condition
New
NDAA/TAA
No
Write Your Own Review